Solarliquid HT ready-to-use

Short Description: Solarliquid HT ready-to-use

Solarliquid HT is produced on the basis of higher quality glycols and is ideal for vacuum tube collectors with high thermal loads. It is already diluted ready for use and offers frost protection down to -23°C. The optimum temperature range for your system is between -23°C and 230°C. Solarliquid HT can be used up to a temperature of approx. 260°C. If the operating temperature is permanently or long-term above 230°C, we recommend installing sufficiently large expansion tanks.

The corrosion inhibitors contained in the long-term antifreeze protect the metals and plastics used in system construction. Corrosion, stratification and deposits are therefore a thing of the past. Your system is optimally protected and efficiency is maintained. For details on material compatibility, please refer to the product information.

Chemical/technical data

Guide values only (no specification values)

Basis	high quality glycol
Density (20°C)	approx. 1.042 g/cm³
pH value (20°C)	approx. 9.5
Reserve alkalinity	approx. 9 mL (0.1 HCl)
Appearance	clear, possibly specifically colored liquid
Flash point	> 100°C
Boiling point	> 100°C
Refractive index nD20	approx. 1.401
Electrical conductivity (20°C)	approx. 600 μS/cm
Viscosity (20°C)	approx. 10 mm²/s

Advantages

of Solarliquid HT ready-to-use

Solarliquid HT is ready to use immediately and does not need to be diluted further with water.
Solarliquid HT is especially suitable for high thermal loads up to max. 260°C.
Materials (metals, plastics and sealing materials) used in system construction are resistant to Solarliquid HT.
The odorless, clear liquid can be specifically dyed if necessary.
It is biodegradable and does not require labeling according to chemical legislation.